how to execute AT-commands under Apple MacOS
1. Open System Preferences.
2. Click Network.
3. Choose Internal Modem from the Show pop-up menu, or choose the external port to which the modem is connected.
Note: This menu is named "Configure" in Mac OS X versions 10.0 to 10.0.4.
4. Click the PPP Tab.
5. Click PPP Options.
6. Click the checkbox to enable the "Connect using a Terminal window" option.
7. Click OK.
8. Click the Modem tab.
9. Choose any modem script that starts with the words "Null Modem, such as Null Modem 19200" from the Modem pop-up menu.
10. Click Apply Now.
Note: This button is called Save in Mac OS X versions 10.0 to 10.0.4.
11. Open the Internet Connect application.
12. Click Connect. After several seconds, a Terminal window opens. At this point, the modem has not dialed.
13. Type the commands that you were given. When you have finished, click Cancel to end the session, or click Continue to use a connection that you made.
source: http://support.apple.com/kb/TA20625
1. Open System Preferences.
2. Click Network.
3. Choose Internal Modem from the Show pop-up menu, or choose the external port to which the modem is connected.
Note: This menu is named "Configure" in Mac OS X versions 10.0 to 10.0.4.
4. Click the PPP Tab.
5. Click PPP Options.
6. Click the checkbox to enable the "Connect using a Terminal window" option.
7. Click OK.
8. Click the Modem tab.
9. Choose any modem script that starts with the words "Null Modem, such as Null Modem 19200" from the Modem pop-up menu.
10. Click Apply Now.
Note: This button is called Save in Mac OS X versions 10.0 to 10.0.4.
11. Open the Internet Connect application.
12. Click Connect. After several seconds, a Terminal window opens. At this point, the modem has not dialed.
13. Type the commands that you were given. When you have finished, click Cancel to end the session, or click Continue to use a connection that you made.
source: http://support.apple.com/kb/TA20625
No comments:
Post a Comment