[TUT] How to Flash SmartBro Unlock(openline) to V4 Sandbox

Paki Delete na lang po if ever....

Mga tol try nyo to.

[TUT] How to Flash SmartBro Unlock(openline) to SmartBro V4 Sandbox OR Vice Versa
 
Successful yan

1. install mo muna un QPST....QPST_Setup
2. tapos isaksak mo na un ZTE MF627.
3. run mo na un QPST Configuration
4. tapos click mo yung "Ports" makikita mo sa bandang itaas iclick mo..( wag ka magpost na hindi mo makita ^_^ haha piz. magbasang mabuti)
5. tapos click mo "add new port" nasa lower right corner
6. tapos click mo naman COMX - USB/QC Diagnostic (kaya 'X' yun kasi depende kung anong com port number yung sa inyo) . tapos click OK..
7. tapos click mo sa taas start clients > tapos click EFS Explorer tapos click OK
8. then, idelete mo lahat ng file pero hindi kasama yung mga nakafolder"right click mo lang sa files tapos click delete...( be sure na nadelete mo lahat ng files na wala sa folder) (itira mo lang yung mga nakafolder)
9. tapos icopy mo lahat ng files dito smartbro v2 smartbro_v2
, ( reason for copying smartbro v2, temp files para sa pag update ng V4.. merong sandbox yan...close mo na yung mga QPST application...
10. after mo macopy yung files, run mo na itong update ZTE_DL_MF627_SMART_PH_EUV1.00.02.exe nakuha ko din d2 sa SB yang update na yan....

eto naman po ung VICE VERSA....

How to openline SmartBro V4 Sandbox

READ 1-10 tapos eto po ung kasunod

11. RUN (DL_MF627_SMART_PH_EUV1.00.02.exe) upgrade for sandbox &wait till it recognize your kit & DON'T CLOSE.....
12. GOTO C:\Program Files\Windows Service\MF100newversion fo;der & DELETE ALL FILES...KAILANGANG WALANG MATIRA
13. GOTO THE FOLDER THAT YOU DOWNLOAD EARLIER AND COPY ALL FILES AND PASTE IT TO C:\Program Files\Windows Service\MF100newversion folder & and remember to close all folder before doing...... eto ung link pang unlock http://www.4shared.com/file/60wgQEjK...ykRet19th.html
14. TICK DOWNLOAD BUTTON AND WAIT TILL FINISH

15. finaL step click thanks button naman ngayon para pamawi ng pagod hahah

ZTE MF637 internal parts " SmartBroPlug-It USB"

I was eager to put an external antenna to my USB modem ZTE MF637, an HSDPA/HSUPA 3.75G from SmartBro Plug-It. I found two internal antenna, one might be the GPRS/EDGE and the other one is for 3G. Though I can't determine well which antenna is 3G and the other. Both has different frequency of operation, whereas 3g UMTS is 2100Mhz and so on.

There is only one internal antenna connector, and which I think is for GPRS/EDGE only.

ZTE MF637 HSUPA modem unlocking

Recent STF(search the forum) I found how to unlock my ZTE MF637 HSUPA 3g modem.

My intention is to look for MF627 unlocking technique for my SmartBro Plug It modem, I downloaded some apps and follow some instructions posted in some forums.

I did not succeed on MF627. Quite unhappy... I was thinking to put my next target my other modem which is model MF637 for unlocking. At first I'm afraid that it might brick the firmware, because there are some suggestions that it is only intended for MF627. Huhh... the hell...what I was thinking... and so I made up a choice to take the risk.

Before unlocking;

a. My Smartbro dashboard is installed and modem drivers, typical installation for SmartBro to work/connects.

b. Replace your Smartbro sim card (e.g. Globe or Sun SIM)

From one of the applications given to unlock MF627 is DC-Unlocker 2 Client v1.00.0460




1. Download the file DC-Unlocker 2 Client (dccrap.zip)
2. Unzip/Extract to any folder or to your desktop

Now Plug in your Smartbro modem with Globe or Sun SIM inserted on it.

3. run the dccrap.exe
4. Select Manufacturer = ZTE datacards
5. click "server"
6. Enter Username/Password of your choice then click "Check Login".
For me, I enter smartbro for both userb=name and password
7. Click on the the Magnify Glass icon to search your modem model automatically.
Dont need to Select model manually.

Just wait for the modem to sync, sometimes reading the datacard is slow.

8. Once your modem has been detected, Click "Unlocking" then UNLOCK it.

You will be then prompted unlocking successful!

Now, Open your Smartbro dashboard, it takes a while to sync in the modem.

From my experiment, I use Sun sim card. Once it catches the signal, you can notice it from the dashboard, signal .::| and the network name (SUN)

Then I configured my Network Settings to Sun Internet on my dashboard.
Name: Sun Wireless(any name of your choice)
Dial Number: *99#
APN: minternet

Set it to default.

Load up with i50 (24 hours unlimited) with 5 pesos regular load balance.

Then here it goes....


Now I wont have to use a strainer to catch that signal of Smart, because we are near to Sun cell site here in Laguna.


This is the internal antenna of SmartBro Plug-It USB modem



If you find this topic helpful to you, kindly post comments of appreciation.

Goodluck! and happy homebrewing(hacking)... =)

BTW, this USB modem MF637, I got it from an event for free.